$55.00 USD $110.00 USD
This custom 15 Watt-Hour battery is for use with the BE-4V GoPro Battery Eliminator for the HERO3 and HERO3+. This specially adapted battery is fitted with a short cable terminated in a "4.0 x 1.7mm male DC connector" (EIAJ-02) to supply 4V compatible with the Cam-Do BE-4V Battery Eliminator. The USB output supplies 5V 1A for use with other USB accessories.
Note that the 4 volt output is always on. It is not necessary to change the battery mode from automatic shutoff to always on unless you are also using the USB output from the battery. The USB output and 4 volt outputs can be used simultaneously, but should not be connected to the same camera at the same time.
$19.00 USD $50.00 USD
Product Code: H0B01
The OtterBox 2500 Series case is a high quality drybox to keep your valuables dry and protected when you're outdoors—great for paddling, hiking and camping.
It is a cleverly-made drybox designed to withstand submersions up to 100 feet! Waterproof, crushproof and airtight, these cases provide protection for your cell phone, sunglasses, PDA, keys, GoPro / small digital camera and more!
$14.50 USD $29.00 USD
Product Code: ASD02
The 32GB microSDHC 633x Class 10 UHS-I Memory Card from Lexar features a maximum read speed of 95MB/s along with a minimum transfer rate of 10MB/s (U1 is rating not recommended for use with HERO3+ and newer cameras). This Class 10 UHS-I card is supplied with a USB 3.0 card reader for high-speed file transfer to your computer.
CamDo recommends these U3 rated 1000x SD cards.
$39.00 USD $105.00 USD
Product Codes: 10ft - ABE05
25ft - ABE06
If you are using the GoPro camera for extended periods, it is better to power the camera with a Battery Eliminator instead of connecting the GoPro's USB port to a charger. These 12V Battery Eliminators come with 2 conductor lead wires and no connectors. These can be connected directly to 12 volt (or any 9 to 24 volt) source. The cables are color coded with red positive and black negative.
The 12V Battery Eliminator includes a voltage regulator and power line filter for maximum noise immunity and automatic accommodation to DC input voltages from 9V to 24V, such as a car or boat battery or a 12V accessory jack. The battery eliminator snaps into the battery slot of all GoPro HERO3 and HERO3+ models and latches like the GoPro lid for a secure fit.
Using a battery eliminator eliminates two sources of heat. The charging circuit in the camera and the battery itself, which gets warm while charging. Less heat makes the camera more reliable. Overheating can cause unexpected shut-down of the camera. A battery eliminator also bypasses the problems that some users have had with the GoPro camera's charging logic causing the camera to freeze and require a hard reset.
WARNING! The warranty does not cover damage that may occur to the adapter or your camera if you connect the wires backwards to the source of power. Lead acid batteries (car batteries) and LiPo batteries can deliver large currents. Always include a fuse (allow 2A per camera) in the circuit. Shorting the wires or connecting the battery eliminator backwards will result in damage to the battery eliminator, a SIGNIFICANT FIRE HAZARD and potential explosion of the battery.