Product Code: MRA01
CamDo recommends the RAM mounts ecosystem which provides a high quality and flexible mounting system. The RAP-B-202U-GOP1 consists of a 1" diameter rubber ball, connected to a custom GoPro® adapter. The adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket.
This allows your camera to be attached to many different mounting options, using various arms and other ball connectors. Want to attach to your car, bike, boat, canoe? No problem!
We utilise this mount and the associated arm in our Dashcam pack. Read more here.
The marine grade aluminum swivel mount kit consists of a 6" long straight swing arm on a vertical mounting base for attachment to a flat or rounded surface such as a wall or post. The opposing end is a ball socket used with the 1.5" ball mount plate that can be attached to our SolarX or DryX outdoor enclosure for ultimate aiming flexibility.
The swing arm pivot allows for full 360-degree rotation and the ball and socket system allows a 360-degree rotation with a 180-degree pivot.
There is an insert on the vertical mounting plate to allow solid mounting to a flat surface like a building or a rounded surface such as a pole or rail.
Included in the kit:
Product Code: MSM01
Product Codes: 3.69" - MRA02
2.38" - MRA03
The arms are part of the RAM mounts ecosystem featuring an extremely flexible ball & socket system. The arms have a socket at both ends accommodating 1" ball bases, for use with the RAM GoPro ball mount. This allows for almost infinite adjustment and perfect viewing angles. The long arm has an overall length of 3.69" and the short arm a more compact 2.38".
The mounting kit for ShootX consists of three parts: a slotted wall plate, a 4" aluminium camera arm, and security lanyard. The camera arm slots into the wall plate and locks with a single release pin. The wire lanyard is then looped through the slot of ShootX and anchored to the mounting arm's release pin for theft protection.
The camera arm has a 360 degree rotating tripod (¼"-20) ball joint with 25° tilt for easily positioning the direction of the camera. Once the camera has been positioned, the tripod's adjustment knob can be tightened to prevent further movement of the tripod ball.
Loosening the camera arm's release pin allows for the camera and arm to be removed from the slotted wall plate to access the camera without affecting the direction of the camera's position when re-instated providing a repeatable mounting system.
Also check out the ShootX Solar Kit for long term off-grid deployment of your ShootX time lapse camera.
The ShootX Mounting Kit is designed for use with our ShootX camera (product code CMR001).
Can I use the ShootX Mounting Kit with other CamDo products?
No, the ShootX Solar Kit is only compatible with the ShootX camera.
General support can be found on our Support pages here.
Also read the FAQ's tab for more information.
Product Code: MSM02