180170
Battery Eliminator, H3 Coupler Style
Sold Out
Product Code: ABE01
The CamDo H3 Coupler Style Battery Eliminator allows you to power the HERO3 and HERO3+ cameras by replacing the standard AHDBT-301 GoPro battery with a voltage regulated coupler. The Battery Eliminator can be powered by any available high current USB port or DC power supply between 5V to 24V.
-
If you are using the GoPro camera for extended periods, it is better to power the camera with a Battery Eliminator instead of connecting it to the camera’s mini-USB charger.
The coupler style Battery Eliminator snaps into the battery slot of all GoPro HERO3 and HERO3+ models and latches like the GoPro lid for a secure fit. Using a Battery Eliminator eliminates two sources of heat. The charging circuit in the camera and the battery itself, which gets warm while charging. Less heat makes the camera more reliable. Overheating can cause unexpected shutdown of the camera. A Battery Eliminator also bypasses the problems that some users have had with the GoPro charging logic causing the camera to freeze and require a reset when operating the camera while the battery is charging.
The Battery Eliminator includes a voltage regulator and power line filter for maximum noise immunity and automatic accommodation to a wide range of input voltages. The Battery Eliminator’s USB input is designed for use with any DC power supply capable of supplying at least 1A of current at 5V to 24V DC.
Note that the H3 Coupler Style Battery Eliminator requires space for the cable to exit the back of the camera. Since Blink does not have a slot for the power cable to pass through, the H3 Coupler Style Battery Eliminator can not be used in combination with Blink.
done_allIncreases Reliability
- The Battery Eliminator prevents two sources of heat: the charging circuit in the camera and the battery itself, which gets warm while charging. Overheating can cause unreliable behavior or unexpected shutdown of the camera. Using our Battery Eliminator also prevents the camera from crashing if a problem occurs while the internal battery is charging.
usbFrees up your camera’s USB port
- No more charging through the camera’s mini-USB port. Now your USB port is ready for camera data retrieval.
powerSimple to use, just add power
- Plug into a USB port, and connect to your camera’s HERO Port. We recommend using a USB port capable of supplying at least 1A of current at 5V to 24V DC.
subdirectory_arrow_rightEfficient Voltage Regulation
- The voltage regulator efficiency is better than 90%, ensuring the lowest power drain on the source and eliminating excess heat generated in the battery coupler.
Specifications:
- Input Voltage: 5 - 24 VDC
- Output Voltage: 4.3 VDC, regulated nominal
- Input connector: USB Type A, Male
- Output connector: GoPro HERO3 Battery Coupler
- Cable Length: 4'6" (1.4m)
-
Camera
Compatibility ( Y / N )
HERO5
✘
HERO5 Session
✘
HERO4 Black
✘
HERO4 Silver
✘
HERO4 Session
✘
HERO (2014)
✘
HERO3+ Black
✔
HERO3+ Silver
✔
HERO3 Black
✔
HERO3 Silver
✔
HERO3 White
✔
HERO2
✘
HERO
✘
Compatible with the GoPro HERO3 and HERO3+ cameras.
-
Frequently Asked Questions
Why Use Our Battery Eliminator?
Our Battery Eliminator increases your camera’s reliability. It prevents two sources of heat: the charging circuit in the camera and the battery itself, which gets warm while charging. Overheating can cause unreliable behavior or unexpected shutdown of the camera. Using our Battery Eliminator also prevents the camera from crashing if a problem occurs while the internal battery is charging.
Will the Coupler Style Battery Eliminator work with other CamDo accessories?
The Battery Eliminator replaces the GoPro camera’s internal battery, so it leaves the HERO Port open for accessories such as our Programmable Scheduler, Time Lapse Intervalometer, Bullet, or Dash. Blink cannot be used with our Coupler Style Battery Eliminator since Blink does not have a slot for the cable to pass through.
Can I attach the Battery Eliminator wires directly to a car/marine battery?
The Battery Eliminator can be powered from a DC input between 5V to 24V. The USB connector can be cut and the wires directly attached to the power source. However, make sure not to reverse the polarity of the wires. Attaching the wires backward can damage the Battery Eliminator and/or the GoPro camera. Removing the USB connector will void any warranty.
-
General support can be found on our Support pages here.
Average GoPro recording times in each video setting (limited by SD card capacity)
Also read the FAQ's tab for more information.
-
What is your return/exchange/warranty policy?
A: We have a 15 day return policy for unused products. Product must be in original packaging and in new condition. For orders (over $1,500) and/or physically larger items (e.g. enclosures), a restocking fee of 10% will apply. Return shipping is the responsibility of the customer.
If the product is opened or used, the product can be returned within 15 days (except SD Cards and GoPro cameras which cannot be returned once opened). A 20% restocking fee will apply for refurbishing opened product. Return shipping is the responsibility of the customer.
If you are having trouble with the product, make sure you check our support area on the website for our Quick Start Guides and Product Documentation. Should you need additional help please contact support@cam-do.com however, please ensure you have submitted all of the information in the form first as our support team will ask for this information on our first reply email and it will save time: https://cam-do.com/search?type=page&q=ticket+support&view=search-support&submit=Search
Should you consider the product be faulty you can request to return the product within 6 months for our assessment. If the product is confirmed to be faulty by CamDo, return shipping costs will be refunded along with a full product refund (except SD Cards and GoPro cameras which cannot be returned once opened). Should the returned items be confirmed functional, a 25% restocking fee will apply to the refund. To initiate a return or exchange, please contact support@cam-do.com to receive an RMA number. Do not ship a product back to us without an RMA number. We will examine all returned items to confirm their condition and contact you regarding the status of your refund. Upon acceptance, please allow 2-3 weeks for the refund to process once the item is received.
We cannot support IT/wifi network/router/modem issues as there are too many variables. Please talk to your IT department/specialist/support team.
Any dismantling or modification(s) to CamDo products will void any warranty and cannot be returned.
GoPro products: HERO5 camera warranty issues are to be handled directly with CamDo. Any warranty issues with HERO6, HERO7, HERO8 and HERO9 cameras are to be handled directly between the customer and GoPro USA. Check out their warranty page here.
LumeCube products: Any warranty issues with LumeCube products are to be handled directly between the customer and LumeCube USA. Just email support@lumecube.com and they will take it from there. Check out their warranty page here.
Both GoPro and LumeCube are very responsive and is how their distribution model works - it is much quicker to get warranty response by emailing them directly.
EQUIPMENT PERFORMANCE LIMITATIONS
CamDo equipment is not fault-tolerant and not designed, manufactured or intended for use in extreme temperature or weather conditions, security surveillance, life support, emergency situations, hazardous or mission critical activities. You use CamDo equipment at at your own discretion and risk.
LIMITATION ON LIABILITY
The replacement warranty is as per the warranty section above. In addition, the replacement warranty is the whole and sole liability for the product. There are no other warranties, expressed or implied. Use of CamDo products confirms your agreement that CamDo Solutions Inc and its distributors will not be liable for any damages from or relating to CamDo Solutions Inc products. Please also note the Equipment Performance Limitations above.