180227
$300.00 USD
Product Code: DeepEXT
The DeepEXT is a professional grade aluminum housing extension that attaches to our DEEP underwater camera housing suitable for deep water and extreme environment monitoring using the HERO3 and HERO4 cameras.
DeepEXT provides an additional 5” behind the camera for batteries or other accessories. The housing is designed to fit up to three V15 batteries (15 Watt-hour) that have the Always On feature required for long term deployment using our Blink controller board. Each V15 battery provides about 3 times the recording length of the standard 4.4Wh HERO4 battery. This means you can extend the standard GoPro battery life by 10 times! Multiple DeepEXT housing extensions can be attached together to lengthen the DEEP underwater camera and increase battery capacity even further. Using Blink, this enables deep water long term deployment.
The housing extension is carved from a solid block of 6061 aluminium alloy that has been anodized to provide great resistance to saltwater and harsh environments. The housing has been tested to withstand pressures of 2,000 ft.
|
Camera |
Compatibility ( Y / N ) |
|
HERO5 |
✘ |
|
HERO5 Session |
✘ |
|
HERO4 Black |
✔ |
|
HERO4 Silver |
✔ |
|
HERO4 Session |
✘ |
|
HERO (2014) |
✘ |
|
HERO3+ Black |
✔ |
|
HERO3+ Silver |
✔ |
|
HERO3 Black |
✔ |
|
HERO3 Silver |
✔ |
|
HERO3 White |
✔ |
|
HERO2 |
✘ |
|
HERO |
✘ |
Compatible with the GoPro HERO3 and HERO4 cameras.
How large is the Deepwater Housing and what does it weigh?
The Deep housing weighs 2.690 lb (1.220kg) and has the following outer dimensions: Length 3 ¼” (8.25cm), Diameter 4 ¼" (10.8cm). The housing extension (DeepEXT) weighs 2.415 lb (1.095 kg) and has the outer dimensions: Length 6 ¼" (15.9cm), Diameter 4 ¼" (10.8cm).
How many batteries can fit inside the DeepEXT housing extension?
The DeepEXT housing extension has a 3⅓” internal diameter and provides an additional length of 5⅓” that can be used to house up to three V15 battery packs or other accessories.
If I need more space, can I attach multiple DeepEXT extensions together?
Yes. Multiple DeepEXT housing extensions can be attached together to lengthen the housing by an additional 5⅓".
How long will the battery last before it is discharged?
How long the battery will last depends on many factors such as the camera you are using and the shooting schedule you have programmed. Use our Time Lapse Calculator and Table of Power Consumption figures to help make an estimate.
The HERO4 camera provides approximately 1-2 hours of total video recording time without external batteries at room temperature. Each V15 provides about 3 times the recording length of the standard 4.4Wh HERO4 battery. Using 3 x V15 batteries, you can expect 10 times the standard GoPro battery life. Coupled with the power saving features of the Blink controller, you can adjust the time lapse interval between images or schedule specific recording times to be able to deploy for many days or weeks.
If you are taking time lapse images, calculations can be done using our Time Lapse Calculator. Keep in mind that temperature, lighting, battery fatigue, and other electrical inefficiencies will prevent the camera from using the full battery capacity.
Why is Always On mode important for an external battery pack?
Most of the USB battery packs on the market have an automatic power saving feature which turns off the battery if the battery is not constantly supplying power to a device. If the GoPro is powered off between triggers, the external battery might shutdown due to inactivity. Often, this feature is not even mentioned in the battery description, and only discovered when you find the camera's internal battery is dead, even though the external battery packs are still fully charged. The V15 has two modes of operation, including an Always On mode that prevents the battery from automatically turning off due to periods of inactivity.
Can the housing accommodate a wired connection?
The aluminum housing can be drilled to safely accommodate another connector such as a cable gland that is available up to 30bar (300m), or even a SubConn connectors for use at extreme depths. There are various types of SubConn connectors to fit different requirements.
General support can be found on our Support pages here.
Make sure that the threads are clear of dirt and a thin layer of silicon grease is applied to the o-ring before connecting the components. It is prudent to test the housing without a camera before deploying for the first time.
Connections between the housing should be hand tightened. Over-tightening of the housing compartments can damage the threaded connections.
Over a long deployment, biological growth can prevent further use of exposed threaded mounting holes. If you need access to these mounting points for future deployments or to assist with disassembling the housing, make sure to plug unused mounting holes using a ¼”-20 threaded screw.
See the 'Deep' manual in our Resources section for further detail
Average GoPro recording times in each video setting
The CamDo Blink controller board is typically used with our Deep Housings to provide programming flexibility while significantly reducing power consumption. Information on Blink can be found on the following pages:
Also read the FAQ's tab for more information.
$259.00 USD
Product Code: CBL01
Use Blink to achieve long term time lapse or motion detection for your next project. Just plug it into your GoPro and use the Blink app to connect and configure up to 10 separate time lapse schedules using a smartphone, tablet, computer, or any WiFi enabled device which has a web browser (no cell service or internet connection required). For more information, see the Quick Start Guide and User Manual. Also check out our tutorial videos for a quick overview of the user interface.
A WiFi network with internet access is only required if you would like to use our optional Blink Email status feature to provide daily status updates.
Compatible with the GoPro HERO3+ Black and HERO4 Black/Silver cameras. Note - Blink may work with HERO3+ Silver cameras but is not officially supported by CamDo due to the general unreliability of the HERO3+ Silver cameras as they get older. Please use our Time Lapse Intervalometer for older camera models.
Our HERO5 controllers are expected to be available by mid 2017. However, while the HERO5 has video image stabilization and higher quality microphones, the HERO4 cameras have the same 12MP image resolution and the HERO4 Black achieves the same video resolution at 4K 30fps.
|
Camera |
Compatibility ( Y / N ) |
|
HERO5 |
✘ |
|
HERO5 Session |
✘ |
|
HERO4 Black |
✔ |
|
HERO4 Silver |
✔ |
|
HERO4 Session |
✘ |
|
HERO (2014) |
✘ |
|
HERO3+ Black |
✔ |
|
HERO3+ Silver |
✘ |
|
HERO3 Black |
✘ |
|
HERO3 Silver |
✘ |
|
HERO3 White |
✘ |
|
HERO2 |
✘ |
|
HERO |
✘ |
Can I have a time lapse and motion detection simultaneously?
Yes, Blink allows for multiple schedules to be active at a time.
What happens if there is a conflict between schedules?
If multiple schedules have been set and there is a conflict between them, priority is given to the lower numbered schedule. For example, schedule 1 has priority over schedule 2.
Does Blink fit inside the standard GoPro housings?
Yes, if housing external batteries is not an issue, Blink can be used with the GoPro Frame Mount or the extended backdoors included in the GoPro Back Door Kit that are designed to clip into the standard housing to provide space to fit GoPro BacPac accessories.
What housings does CamDo offer that have space for Blink and external battery packs?
Blink is typically used with our Outdoor Enclosures to also house extra batteries and come with three power options, a 6Watt solar panel, 9Watt solar panel, or without a solar panel that is normally used for shorter deployments, when you can return regularly to recharge the batteries. The Outdoor Enclosures have space to fit up to two of our V44 (44watt-hour) battery packs.
If you require a waterproof solution, our aluminum Deep underwater housing allows for use of Blink and the GoPro to a depth of 2000ft, while the DeepEXT housing extension can fit up to three V15 (15watt-hour) battery packs.
How long will the battery last if I shoot some number of photos per hour?
Calculating battery life is non-trivial. It depends on the camera model, firmware version, SD card speed, lighting conditions, battery size, age of the battery, ambient temperature, and more. To help you understand the issues and to calculate estimated battery life, consult the Camera Power Consumption Study and our Time Lapse Calculator.
If I know approximately how long my project is, how do I determine the ideal interval between triggers?
The ideal shooting interval is normally determined by the length of the final time lapse video clip, capacity of the SD card or battery capacity available. Our Time Lapse Calculator can be used to help determine the ideal interval between photos as determined by these variables.
Why is "Always On" mode for batteries important?
Since Blink turns the camera off between triggers to conserve power, Always On mode is important to prevent the battery from automatically turning off due to periods of inactivity. Most of the USB battery packs on the market have an automatic power saving feature which turns off the battery if the battery is not constantly supplying power to a device. If the GoPro is turned off for more than a few minutes between triggers, the external battery might automatically shutdown due to inactivity. However, our V15 and V44 have two modes of operation, the standard Auto Off mode and an Always On mode. The Always On mode prevents the battery from automatically turning off when insufficient current is being drawn due to the camera being turned off by Blink to conserve power.
Does Blink retain the shooting schedule when power is removed or lost?
When all power is removed, Blink will retain the programmed shooting schedule. However, Blink does not have an internal battery to retain the time and date settings. When power is restored to Blink, it will determine the clock time and date information from the GoPro camera.
Can I switch the SD card in the middle of a time lapse schedule?
Yes, the SD card is "hot swappable". If an interval occurs when the SD card is out of the GoPro, Blink will continue the shooting schedule by triggering the camera to turn on and off, however, no image will be taken since there is no SD card to save the image to.
How do I change Blink's shooting schedule in the middle of a project?
Blink's WiFi can be turned on or off by using the supplied push button remote plugged into the board's 2.5mm input. Blink's WiFi only remains active for 15 minutes to program the new settings before the WiFi is automatically turned off to conserve power. If the camera is not easily accessable, we offer 2.5mm Extension cables that can be left attached to Blink's 2.5mm port for re-triggering the WiFi signal.
What can I connect to the circular jacks on my Blink?
Please connect only CamDo-approved accessories to these jacks. Do not connect other equipment, especially voltage sources such as your solar panel or battery, to these jacks. Doing so will damage your Blink or camera.
Does Blink work with your Battery Eliminators?
Blink is not compatible with our Battery Eliminators.
What does Blink weigh?
Blink weighs 19g. This compares to a GoPro camera at 87g plus the GoPro extended enclosure at 71g.
General support can be found on our Support pages here.
Also read the FAQ's tab for more information.
$695.00 USD
Product Code: 9Watt - HSO03
Our Solar Enclosures use a 9Watt solar panel to recharge the included V15 battery.
Our outdoor enclosure is fitted with a sturdy aluminum mounting bracket that contains multiple ¼"-20 threaded holes on the top, back, and bottom for use with standard tripod screws. It also has 2 slots at the back for using straps to attach the enclosure to a pole. The solar panel is removable and attached to the top of the enclosure using a dual ball socket arm so it can be positioned for optimum sun exposure. The solar panel charges the included Lithium Polymer battery which outputs 5 volts to power the camera or other accessories in a weatherproof enclosure.
We also offer a sturdy swivel mount for easy mounting to a pole or flat surface, check out the product page here.
The enclosures are designed to be crushproof and dust tight. Inside the weather resistant enclosure contains an aluminum bracket designed to hold the GoPro camera, and CamDo Controller board. It is possible to access the SD card, or USB connector without removing the camera. If the camera needs to be replaced, the fit is extraordinarily tight, guaranteeing that the camera will be in the exact same position as before. The interior has space for extra batteries or other accessories. The enclosure is fitted with a standard 55mm filter adapter and a neutral density UV optical glass “digital filter” is included. You can replace the filter with your filter of choice.
Our case has several mounting options for different situations. There are two ¼” locking holes, one on each side of the case, through which a padlock, bolts, or threaded rods can be used to secure the contents of the box.
There are 2 slots on the back of the aluminum mounting bracket which allow it to be easily attached to a pole or structure using straps such as hose clamps or zip ties. The tripod screw holes at the back of the bracket can then be used to angle the camera.
We also offer a high quality swivel mount bracket that can be added to your system which allows fantastic aiming flexibility. Read more here.
The aluminum mounting bracket has multiple tripod screw holes on the top, back, and bottom that can be used with any standard photographic tripod or mounting bracket with a normal tripod thread (¼"-20). ¼"-20 bolts are easily obtained from any hardware store if you are making your own mount. There are hundreds of different compatible mounting brackets and magic arm brackets. 
9Watt Solar Panel
Colors Available
* We are currently stocking only the favorite pick, black. All of the colors are available on custom orders, but please allow up to one month delivery time. We will add other colors to general stock if there is sufficient demand.
|
Camera |
Compatibility ( Y / N ) |
|
HERO5 |
✘ |
|
HERO5 Session |
✘ |
|
HERO4 Black |
✔ |
|
HERO4 Silver |
✔ |
|
HERO4 Session |
✘ |
|
HERO (2014) |
✘ |
|
HERO3+ Black |
✔ |
|
HERO3+ Silver |
✔ |
|
HERO3 Black |
✔ |
|
HERO3 Silver |
✔ |
|
HERO3 White |
✔ |
|
HERO2 |
✘ |
|
HERO |
✘ |
Compatible with the GoPro HERO3, HERO3+ and HERO4 cameras.
Which CamDo Solar System is right for my GoPro camera?
Our currently available Solar-9W products are compatible with Hero3, Hero3+ and Hero4 cameras. Refer Compatibility tab.
How do I setup my system?
View the Solar Power System set-up guide here.
How long does it take to charge the battery?
In direct sun, the V15 (4,000 mAH Lithium Polymer battery) will fully charge in approximately 5.5 hours using the 6W solar panel. Where the weather is frequently cloudy/raining we recommend the 9W solar panel option. The battery system incorporates protection against overcharging, over discharge, over current (short circuit), unusual voltage input, and temperature extremes.
Will the solar panel be able to keep my time lapse running indefinitely?
This would depend on the shooting cycle used and the sun exposure available in your location. We advise all customers to calculate their battery needs due to the many variables. We have a Time Lapse Calculator that can be used to help determine your ideal shooting interval and how long your battery should theoretically last using our controller boards and batteries. The Calculator also gives the rate at which the solar panel should be able to recharge your battery at your given location and with the panel angle that is used. Keep in mind that temperature, battery fatigue, and other electrical inefficiencies will prevent the camera from using the full battery capacity.
What is the original dust and water ingress rating of your enclosures? Can I submerge your Solar or DRY enclosures?
The enclosures have an IP67 rating prior to installation of CamDo accessories. Our Solar and DRY enclosures are not meant to be immersed in water.
How long will the battery last before it is discharged?
It depends on many factors including your latitude, the amount of sun and cloud during your shoot, the controller you are using, the camera you are using and the shooting schedule you have programmed. There are too many variables to give a perfect answer but we have created a Time Lapse Calculator to work out the best setup for your shoot in your location.
This uses our analysis of the power consumption of the various GoPro cameras and provides an explanation of how to calculate the theoretical battery life.
Practically, we have run the system indefinitely taking one picture every 15 minutes with the WiFi on, in Canada in the summer.
Why is "Always On" mode for batteries important?
Since our controllers turn the camera off between triggers to conserve power, Always On mode is important to prevent the battery from automatically turning off. Most of the USB battery packs on the market have an automatic power saving feature which turns off the battery if the battery is not constantly supplying power to a device. If the GoPro is powered off for more than a few minutes between triggers, the external battery might automatically shutdown due to inactivity. However, our V15 battery packs have two modes of operation, the standard Auto Off mode and an Always On mode. The Always On mode prevents the battery from automatically turning off when insufficient current is being drawn due to the camera being powered off.
Refer to our support page here to make sure you are in "Always On" mode when setting up your system. Refer Step 2 of the guide.
Make sure to disconnect the battery from all devices to check this. If you hold down the power button for six seconds and the charge indicator flashes 3 times and stays lit for a second or two, you are now in Always On mode. If you hold down the power button for six seconds and the charge indicator flashes 3 times and then goes dark straight away, you are in Auto Off mode.
How can I avoid condensation on the lens?
Our enclosures have an integrated auto-pressure valve that equalizes the atmospheric pressure difference to reduce condensation. The IP67 micro vent allows air to pass through while preventing water from entering. If you need additional protection against condensation, the extra space in the solar enclosure allows for one or more sacks of desiccant to be inserted in the box. For even more protection, there are some products available to coat the lens, such as those used on ski-goggles. The standard 55mm threaded lens filter can also be replaced with another 55mm threaded lens that already has anti-fog characteristics or coating.
TIP: Condensation is a result of humid air being sealed in the box when you close it and condensing when there is a temperature change. Try to close the box in as dry an environment as possible. If you need additional protection against condensation, the extra space in the solar enclosure allows for one or more sacks of desiccant to be inserted in the box. For more information, Google for avoiding condensation in underwater cameras, where the problem is discussed at length by many experienced photographers.
Can I lock the case?
There are two ¼” locking holes, one on each side of the case, through which padlocks, bolts, or threaded rods can be used to secure the contents of the box.
Is it possible to separate the solar panel from the box?
Yes. The solar panel is removable and has a 4ft charging cable that enters the enclosure through a waterproof cable gland at the bottom of the enclosure.
Can I mount the solar panel remotely from the enclosure?
Yes. However, if you need to place the panel remotely from the enclosure, attention must be paid to the gauge of wire used to connect the solar panel to the battery. The connectors on the solar panel cable are 3.5mm outer diameter, 1.1mm inner diameter barrel power connectors. So you'll need one end male (M3.5x1.1), the other one end female (F3.5x1.1). A local electronics store will have these connectors. We recommend using the largest cable that can physically fit into the particular connector you source to minimize voltage drop from the panel to the battery. The voltage drop must not exceed 0.5 volts. A 16 AWG or larger wire is recommended for distances exceeding a few feet.
Which cables and adapters come with the system and what do I use to connect the battery to the solar panel?
The system comes with all necessary cables along with a number of useful adapters for charging phones and other cameras as well as the cables used to charge the battery. 
Refer Step 6 of our Solar Setup Guide.
Can I use this system to charge other devices as well?
Absolutely. The V15 battery pack can be used to charge any 5V device.
Can your systems be used for other purposes than GoPro cameras?
Yes. You can remove the GoPro mounting fixture to provide extra space for your equipment. The solar panel, battery, and enclosure can be used for your custom system or just used as a remote charging station for phones and other USB chargeable devices.
Does the enclosure O-Ring seal require special care?
The case is equipped with a hollow core EPDM gasket that has been designed to give superior performance and resist compressive deformation over time. To ensure a watertight seal, the gasket must be free of cuts, abrasions or tears. Debris or foreign material caught between the sealing rib on the bottom of the case and the gasket on the top of the case will prevent the case from sealing properly. A coat of an automotive type surface protector is recommended to help prevent dirt and debris from sticking to the seal. If the seal becomes damaged a replacement seal can be ordered from Cam-Do.com.
Special care should be taken to ensure that wires or cables do not get trapped in the door when it is closed. The power-claw latches can exert extreme force, resulting in damage to the cable and the O-ring seal.
General support can be found on our Support pages here.
The CamDo Blink controller board is typically used with our Solar Enclosures to provide programming flexibility while significantly reducing power consumption. Information on Blink can be found on the following pages:
Also, read the FAQ's tab for more information.
$295.00 USD
Product Code: HDR01
Our tough, weatherproof† dry enclosures are designed to be crush proof, air tight, UV resistant and built to survive in a hostile environment.
The DRY enclosure is the same enclosure that ships with our Solar Power System but does not include a battery pack or solar panel. Our outdoor enclosures are fitted with a sturdy aluminum mounting bracket that contains multiple 1/4"-20 threaded holes on the top, back, and bottom for use with standard tripod screws. It also has 2 slots at the back for using straps to attach the enclosure to a pole.
We also offer a sturdy swivel mount for easy mounting to a pole or flat surface, check out the product page here.
Inside the enclosure contains an aluminum bracket designed to hold the GoPro camera and a CamDo controller board such as Blink. It is possible to access the SD card, or USB connector without moving the camera. If the camera needs to be replaced, the fit is extraordinarily tight, guaranteeing that the camera will be in the exact same position as before. The interior has space for extra batteries or other accessories. One accessory that can be used with Blink is our X-Band Motion Sensor that can detect motion through the walls of the enclosure without requiring extra opening for the signal to pass through. The enclosure is fitted with a standard 55mm filter adapter and a neutral density UV optical glass “digital filter” is included. You can replace the filter with your filter of choice.
† These enclosures are not submersible. The degree of water resistance depends on the mounting method and options selected. They are suitable for outdoor use.
Our case has several mounting options for different situations. There are two ¼” locking holes, one on each side of the case, through which a padlock, bolts, or threaded rods can be used to secure the contents of the box.
There are 2 slots on the back of the aluminum mounting bracket which allow it to be easily attached to a pole or structure using straps such as hose clamps or zip ties. The tripod screw holes at the back of the bracket can then be used to angle the camera.
We also offer a high quality swivel mount bracket that can be added to your system which allows fantastic aiming flexibility. Read more here.
The aluminum mounting bracket has multiple tripod screw holes on the top, back and bottom that can be used with any standard photographic tripod or mounting bracket with a normal tripod thread (1/4" x 20). 1/4 x 20 bolts are easily obtained from any hardware store if you are making your own mount. There are hundreds of different compatible mounting brackets and magic arm brackets.
Colors Available
* We are currently stocking only the favorite pick, black. All of the colors are available on custom orders, but please allow up to one month delivery time. We will add other colors to general stock if there is sufficient demand.
|
Camera |
Compatibility ( Y / N ) |
|
HERO5 |
✘ |
|
HERO5 Session |
✘ |
|
HERO4 Black |
✔ |
|
HERO4 Silver |
✔ |
|
HERO4 Session |
✘ |
|
HERO (2014) |
✘ |
|
HERO3+ Black |
✔ |
|
HERO3+ Silver |
✔ |
|
HERO3 Black |
✔ |
|
HERO3 Silver |
✔ |
|
HERO3 White |
✔ |
|
HERO2 |
✘ |
|
HERO |
✘ |
Can the DRY enclosure be powered by mains power?
The DRY enclosure has a removable plug at the bottom that provides a 3/4" (19mm) hole to allow AC power or other cabling to enter the enclosure. A 5V 2A USB wall adapter can be used to power the camera system inside the enclosure.
If you would like more power reliability incase of power outages, the DRY enclosure has space to house our V15 or V44 batteries that can be used as an Uninterruptible Power Supply because they can supply power while charging and be used in an "Always On" mode.
How many battery packs can fit inside the DRY Enclosure?
The DRY enclosure can fit up to three V15 or two V44 battery packs that both have the Always On mode that is required for long term deployment using our controller boards.
Why is "Always On" mode for batteries important?
Since our controllers turn the camera off between triggers to conserve power, Always On mode is important to prevent the battery from automatically turning off. Most of the USB battery packs on the market have an automatic power saving feature which turns off the battery if the battery is not constantly supplying power to a device. If the GoPro is powered off for more than a few minutes between triggers, the external battery might automatically shutdown due to inactivity. However, our V15 and V44 have two modes of operation, the standard Auto Off mode and an Always On mode. The Always On mode prevents the battery from automatically turning off when insufficient current is being drawn due to the camera being powered off.
How long will the battery last before it is discharged?
It depends on many factors including the outside temperature, the age of your battery, controller you are using, the camera you are using and the shooting schedule you have programmed. There are too many variables to give a perfect answer, but if you are taking time lapse images, we have created a Time Lapse Calculator that can be used to help determine how long your battery should theoretically last using our controller boards. The calculator can also be used to determine your ideal shooting interval based on the length of the project and final video clip length you are trying to achieve.
This uses our analysis of the power consumption of the various GoPro cameras and provides an explanation of how to calculate the theoretical battery life.
How can I avoid condensation on the lens?
Our enclosures have an integrated auto-pressure valve that equalizes the atmospheric pressure difference to reduce condensation. The IP67 micro vent allows air to pass through while preventing water from entering. If you need additional protection against condensation, the extra space in the solar enclosure allows for one or more sacks of desiccant to be inserted in the box. For even more protection, there are some products available to coat the lens, such as those used on ski-goggles. The standard 55mm threaded lens filter can also be replaced with another 55mm threaded lens that already has anti-fog characteristics or coating.
TIP: Condensation is a result of humid air being sealed in the box when you close it and condensing when there is a temperature change. Try to close the box in as dry an environment as possible. If you need additional protection against condensation, the extra space in the solar enclosure allows for one or more sacks of desiccant to be inserted in the box. For more information, Google for avoiding condensation in underwater cameras, where the problem is discussed at length by many experienced photographers.
Can I lock the case?
There are two ¼” locking holes, one on each side of the case, through which padlocks, bolts, or threaded rods can be used to secure the contents of the box.
What is the original dust and water ingress rating of your enclosures? Can I submerge your Solar or DRY enclosures?
The enclosures have an IP67 rating prior to installation of CamDo accessories. Our Solar and DRY enclosures are not meant to be immersed in water.
Does the enclosure O-Ring seal require special care?
The case is equipped with a hollow core EPDM gasket that has been designed to give superior performance and resist compressive deformation over time. To ensure a watertight seal, the gasket must be free of cuts, abrasions or tears. Debris or foreign material caught between the sealing rib on the bottom of the case and the gasket on the top of the case will prevent the case from sealing properly. A coat of an automotive type surface protector is recommended to help prevent dirt and debris from sticking to the seal. If the seal becomes damaged a replacement seal can be ordered from Cam-Do.com.
Special care should be taken to ensure that wires or cables do not get trapped in the door when it is closed. The power-claw latches can exert extreme force, resulting in damage to the cable and the O-ring seal.
General support can be found on our Support pages here.
The CamDo Blink controller board is typically used with our Dry Enclosures to provide programming flexibility while significantly reducing power consumption. Information on Blink can be found on the following pages:
Also, read the FAQ's tab for more information.
