The Deep Water Camera Housings have room for the GoPro HERO3 or HERO4 camera and a BacPac sized accessory, such as a GoPro Battery BacPac or the CamDo Blink Time Lapse Controller along with access to GoPro camera's USB and HDMI ports and the input/output ports of Blink. The optional battery housing extension (DeepEXT) is designed to fit up to three V15 (15 Watt-hour) batteries or one V50 battery that have the Always On feature required for long term time lapses. Each V15 battery provides about 3 times the recording length of the standard 4.4Wh HERO4 battery. With 3 x V15 batteries, that is 10 x the normal GoPro battery life!
The housing is carved from a solid block of 6061 aluminum alloy that has been anodized to provide great resistance to saltwater and harsh environments. The housing has been tested to withstand pressures of 2,000 ft.
The housing allows access to GoPro camera's USB and HDMI ports as well as the input/output ports of Blink.
buildNo Tools Required
The fitting between housings components does have any external screws that can become filled with biological growth over a long deployment period.
trending_upExtendable for Battery Packs or Accessories
The optional battery housing screws into the camera housing to provide an additional 5” that can be used to fit up to three V15 (15 watt-hour) batteries or one V50 battery. Each V15 provides about 3times the recording length of the standard 4.4Wh HERO4 battery and have the Always On feature required for long term time deployment with Blink.
Compatibility ( Y / N )
Compatible with the GoPro HERO3 and HERO4 cameras.
Frequently Asked Questions
How do I mount the Deepwater Housing?
The Deep housing does not include a tripod or footings. The Deep camera housing has three ¼"-20 threadded holes for mounting or connecting accessories. The Deep's mounting points are located at the top and bottom of the camera housing as well as the middle of the end cap. The housing extension (DeepEXT) does not provide additional mounting holes.
How large is the Deepwater Housing and what does it weigh?
The Deep housing weighs 2.690 lb (1.220kg) and has the following outer dimensions: Length 3 ¼” (8.25cm), Diameter 4 ¼" (10.8cm). The housing extension (DeepEXT) weighs 2.415 lb (1.095 kg) and has the outer dimensions: Length 6 ¼" (15.9cm), Diameter 4 ¼" (10.8cm).
How many batteries can fit inside the DeepEXT housing extension?
The DeepEXT housing extension has a 3⅓” internal diameter and provides an additional length of 5⅓” that can be used to house up to three V15 battery packs or other accessories.
If I need more space, can I attach multiple DeepEXT extensions together?
Yes. Multiple DeepEXT housing extensions can be attached together to lengthen the housing by an additional 5⅓".
How long will the battery last before it is discharged?
The HERO4 camera provides approximately 1-2 hours of total video recording time without external batteries at room temperature. Each V15 provides about 3 times the recording length of the standard 4.4Wh HERO4 battery. Using 3 x V15 batteries, you can expect 10 times the standard GoPro battery life. Coupled with the power saving features of the Blink controller, you can adjust the time lapse interval between images or schedule specific recording times to be able to deploy for many days or weeks.
If you are taking time lapse images, calculations can be done using our Time Lapse Calculator. Keep in mind that temperature, lighting, battery fatigue, and other electrical inefficiencies will prevent the camera from using the full battery capacity.
Why is Always On mode important for an external battery pack?
Most of the USB battery packs on the market have an automatic power saving feature which turns off the battery if the battery is not constantly supplying power to a device. If the GoPro is powered off between triggers, the external battery might shutdown due to inactivity. Often, this feature is not even mentioned in the battery description, and only discovered when you find the camera's internal battery is dead, even though the external battery packs are still fully charged. The V15 has two modes of operation, including an Always On mode that prevents the battery from automatically turning off due to periods of inactivity.
Can the housing accommodate a wired connection?
The aluminum housing can be drilled to safely accommodate another connector such as a cable gland that is available up to 30bar (300m), or even a SubConn connectors for use at extreme depths. There are various types of SubConn connectors to fit different requirements.
What are the properties of the lens?
The optical glass lens provides excellent transmittance throughout the visible and near infrared spectra and down to 350nm in the ultraviolet. The lens highly scratch resistant with a Young’s Modulus of 8.63 x 105 kg/cm2 and has a refractive index of 1.517 at 589nm.
Make sure that the threads are clear of dirt and a thin layer of silicon grease is applied to the o-ring before connecting the components. It is prudent to test the housing without a camera before deploying for the first time.
Connections between the housing should be hand tightened. Over-tightening of the housing compartments can damage the threaded connections.
Over a long deployment, biological growth can prevent further use of exposed threaded mounting holes. If you need access to these mounting points for future deployments or to assist with disassembling the housing, make sure to plug unused mounting holes using a ¼”-20 threaded screw.
General support can be found on our Support pages here.
The CamDo Blink controller board is typically used with our Deep Housings to provide programming flexibility while significantly reducing power consumption. Information on Blink can be found on the following pages:
A: We have a 15 day return policy for unused products. Product must be in original packaging and in new condition. For orders (over $1,500) and/or physically larger items (e.g. enclosures), a restocking fee of 10% will apply. Return shipping is the responsibility of the customer.
If the product is opened or used, the product can be returned within 15 days (except SD Cards and GoPro cameras which cannot be returned once opened). A 20% restocking fee will apply for refurbishing opened product. Return shipping is the responsibility of the customer.
Should you consider the product be faulty you can request to return the product within 6 months for our assessment. If the product is confirmed to be faulty by CamDo, return shipping costs will be refunded along with a full product refund (except SD Cards and GoPro cameras which cannot be returned once opened). Should the returned items be confirmed functional, a 25% restocking fee will apply to the refund. To initiate a return or exchange, please contact email@example.com to receive an RMA number. Do not ship a product back to us without an RMA number. We will examine all returned items to confirm their condition and contact you regarding the status of your refund. Upon acceptance, please allow 2-3 weeks for the refund to process once the item is received.
We cannot support IT/wifi network/router/modem issues as there are too many variables. Please talk to your IT department/specialist/support team.
Any dismantling or modification(s) to CamDo products will void any warranty and cannot be returned.
GoPro products:HERO5 camera warranty issues are to be handled directly with CamDo. Any warranty issues with HERO6, HERO7, HERO8 and HERO9 cameras are to be handled directly between the customer and GoPro USA. Check out their warranty page here.
LumeCube products: Any warranty issues with LumeCube products are to be handled directly between the customer and LumeCube USA. Just email firstname.lastname@example.org and they will take it from there. Check out their warranty page here.
Both GoPro and LumeCube are very responsive and is how their distribution model works - it is much quicker to get warranty response by emailing them directly.
EQUIPMENT PERFORMANCE LIMITATIONS
CamDo equipment is not fault-tolerant and not designed, manufactured or intended for use in extreme temperature or weather conditions, security surveillance, life support, emergency situations, hazardous or mission critical activities. You use CamDo equipment at at your own discretion and risk.
LIMITATION ON LIABILITY
The replacement warranty is as per the warranty section above. In addition, the replacement warranty is the whole and sole liability for the product. There are no other warranties, expressed or implied. Use of CamDo products confirms your agreement that CamDo Solutions Inc and its distributors will not be liable for any damages from or relating to CamDo Solutions Inc products. Please also note the Equipment Performance Limitations above.